NYLON FILKEMP – 1Kg

Name: NYLON FILKEMP - 1Kg
SKU: CAC111
Price: 39.60 EUR
Availability: InStock

39.60€ + VAT AT 23%

Nylon (Polyamide) filament by Filkemp is a 3D printing filament with superior performance, ideal for industrial modeling and prototyping.
It was designed to be easy to print and does not require heated bed.
Extrudes at 230ºC.

Ø Diameter = 1.75 mm

Advantages

Impact resistant
Good thermal durability
Semi-flexible
Durable

Machinable
Smooth surface

Low shrinkage
Odorless

Applications

Industrial modeling and prototyping
Impact-protective components
Jigs
Machinable parts
Fatigue endurance models and objects

Weight	1 kg
Dimensions	20 × 20 × 7.5 cm
Brand	Filkemp

Datasheet

Download here

Recommendations

Always store in an airtight container with desiccant. Nylon is very hygroscopic (absorbs water from the air).
Filkemp Nylon absorbs water at a lower rate than other nylon filaments. Nevertheless, if not correctly stored, it will eventually absorb so much water that will affect the layer adhesion and weaken the printed object. It will also ruin the surface finish. At this point the filament must be dried.

HOW DOES MOISTURE SENSITIVITY IMPACT NYLON?
NYLON is a hygroscopic material. This means that it attracts moisture from the air which can have a negative impact on the printing performance. After printing, it is strongly recommended to place the spool into a vacuum bag (without any silica*) for storage.
* More often than not silica gel sachets contain a higher ppm moisture content than the filament itself which would have a reversed effect.